J50

Yasnac J50 CNC control alarms listing.

Yasnac alarm: 75 - RS232C ERROR (BAUD RATE)

CNC Alarm Error Message
75 - RS232C ERROR (BAUD RATE)
Control Manufacturer
Yaskawa
Control Model
J50, MX1, MX2, MX3, LX1

Yaskawa/Yasnac CNC Machine Alarm Description

RS232C INTERFACE DISAGREEMENT OF NO. OF BITS AND NO. OF BAUD RATES.

<p></p>
Help Others
Post CNC machine troubleshooting recommendations for (Yasnac alarm: 75 - RS232C ERROR (BAUD RATE)) error message below.

Yasnac alarm: 67 - POWER TURNED OFF MEMORY WRITING/WHILE EDITING

CNC Alarm Error Message
67 - POWER TURNED OFF MEMORY WRITING/WHILE EDITING
Control Manufacturer
Yaskawa
Control Model
J50, MX1,

Yaskawa/Yasnac CNC Machine Alarm Description

POWER TURNED OFF DURING WRITING MEMORY

<p></p>
Help Others
Post CNC machine troubleshooting recommendations for (Yasnac alarm: 67 - POWER TURNED OFF MEMORY WRITING/WHILE EDITING) error message below.

Yasnac alarm: 66 - RESET UNREADY (AFTER EDITING)

CNC Alarm Error Message
66 - RESET UNREADY (AFTER EDITING)
Control Manufacturer
Yaskawa
Control Model
J50, MX1, MX2, MX3LX2, LX3

Yaskawa/Yasnac CNC Machine Alarm Description

CYCLE STARTED WITHOUT RESETTING AFTER EDITING

<p></p>
Help Others
Post CNC machine troubleshooting recommendations for (Yasnac alarm: 66 - RESET UNREADY (AFTER EDITING)) error message below.

Yasnac alarm: 59 - ZR UNREADY

CNC Alarm Error Message
59 - ZR UNREADY
Control Manufacturer
Yaskawa
Control Model
J50, MX1, MX2, MX3, LX1, LX2, LX3

Yaskawa/Yasnac CNC Machine Alarm Description

REFERENCE POINT RETURN NOT COMPLETED ON THE AXIS WHICH HAS G29 COMMAND OR G30 COMMAND. LATHE- G28 NOT COMPLETED ON THE AXIS WHICH HAS G29 COMMAND OR REFERENCE POINT RETURN NOT COMPLETED ON THE AXIS WHICH HAS G30 COMMAND.

<p></p>
Help Others
Post CNC machine troubleshooting recommendations for (Yasnac alarm: 59 - ZR UNREADY) error message below.
Subscribe to J50

Theme by Danetsoft and Danang Probo Sayekti inspired by Maksimer